Create Decorator / Painter RAMS in Under 10 Minutes
Pre-loaded with decorating hazards — VOCs, sanding dust, ladder work and more. Generate a compliant Risk Assessment & Method Statement for any painting or decorating job.
What job are you doing?
Choose a common decorator / painter job
What's Included
Everything you need for a compliant decorator / painter RAMS
- HSE-aligned decorating hazard library
- COSHH and VOC control examples
- 5×5 risk matrix with pre/post controls
- Professional PDF export with your branding
- Digital sign-off and audit trail
Common Decorator / Painter Jobs
RAMS Builder includes guided examples for these typical decorator / painter tasks
Typical Hazards & Controls
Pre-loaded hazards and controls for decorator / painter work
VOCs / COSHH (solvents, paints)
- COSHH assessment completed
- Adequate ventilation
- Solvent-resistant gloves
Sanding dust inhalation
- Dust extraction
- RPE (FFP2 mask)
- Wet sanding where possible
Ladder and step work
- Correct ladder for job
- 3-point contact
- Podium steps preferred
Fire risk (solvents and rags)
- No ignition sources
- Rags in metal bin with lid
- Extinguisher available
Skin / eye contact (chemicals)
- Barrier cream
- Safety goggles
- Wash facilities on site
Method Statement Steps
A typical method sequence for decorator / painter work
- 1Prepare surfaces (fill, sand, clean)
- 2Isolate area and ensure ventilation
- 3Apply primer / undercoat
- 4Apply finish coats (brush / roller / spray)
- 5Allow dry time between coats
- 6Clean up and remove protection
Example Output
Review a fully featured decorator / painter RAMS example with hazards, permits, COSHH, and sign-off details
Decorator / Painter example RAMS PDF
Use this example to see how the finished document can be structured before you customise it for the live site, scope, and controls.
Inline preview available on demand
Open or download the example PDF when you need it. The preview is not auto-loaded here so the page does not depend on launching PDF generation during initial render.
Frequently Asked Questions
Common questions about decorator / painter RAMS
What COSHH information should be in a decorator RAMS?
Include product data sheet references, hazard symbols, exposure limits, ventilation requirements, PPE needed, and first aid measures for each product used.
What extra controls are needed for spray painting?
Add extraction ventilation requirements, spray booth or sheeted enclosure, RPE with organic vapour filter, overspray containment, and fire watch procedures.
What's the safe ladder use guidance for decorators?
Reference the HSE 'Leaning ladder and stepladder' guidance: 3-point contact, maximum 30 minutes at one position, secure at top and bottom, and use platforms for extended work.
Ready to Create Your Decorator / Painter RAMS?
Start from the example, customise it for the live job, and export a site-ready PDF when you're happy.
What job are you doing?
Choose a common decorator / painter job