Create Plumber RAMS in Under 10 Minutes
Pre-loaded with plumbing hazards — scalds, hot works, manual handling and more. Generate a compliant Risk Assessment & Method Statement for any plumbing job.
What job are you doing?
Choose a common plumber job
What's Included
Everything you need for a compliant plumber RAMS
- HSE-aligned plumbing hazard library
- Hot works and isolation method examples
- 5×5 risk matrix with pre/post controls
- Professional PDF export with your branding
- Digital sign-off and audit trail
Common Plumber Jobs
RAMS Builder includes guided examples for these typical plumber tasks
Typical Hazards & Controls
Pre-loaded hazards and controls for plumber work
Scalds / hot water
- Allow system to cool
- Protective gloves
- TMV where required
Legionella awareness
- Flush stagnant systems
- Temperature checks
- Follow HSG274
Hot works (soldering)
- Fire blanket behind joint
- Extinguisher available
- Hot works permit
Slips and trips (wet surfaces)
- Non-slip mats deployed
- Wet floor signs
- Regular housekeeping
Manual handling (sanitary ware)
- Two-person lift
- Mechanical aids
- Clear route before lift
Method Statement Steps
A typical method sequence for plumber work
- 1Isolate water supply
- 2Protect surrounding area
- 3Remove / fit pipework
- 4Pressure test connections
- 5Reinstate and clean up
- 6Handover to client
Example Output
Review a fully featured plumber RAMS example with hazards, permits, COSHH, and sign-off details
Plumber example RAMS PDF
Use this example to see how the finished document can be structured before you customise it for the live site, scope, and controls.
Inline preview available on demand
Open or download the example PDF when you need it. The preview is not auto-loaded here so the page does not depend on launching PDF generation during initial render.
Frequently Asked Questions
Common questions about plumber RAMS
Do I need a hot works permit in my RAMS?
If your job involves soldering, brazing or any open flame, a hot works permit is best practice and often required on commercial sites. RAMS Builder includes hot works controls in the plumbing hazard library.
What controls should I list for blowtorch soldering?
Include fire blanket behind the joint, a suitable fire extinguisher within reach, combustible materials cleared, and a fire watch period after work. These are all pre-loaded in RAMS Builder.
What should a plumbing RAMS include for water isolation?
Document the isolation point, method of isolation, who is responsible, notification to building occupants, and the procedure for restoring supply. RAMS Builder templates cover this.
Ready to Create Your Plumber RAMS?
Start from the example, customise it for the live job, and export a site-ready PDF when you're happy.
What job are you doing?
Choose a common plumber job