Welding fume and respiratory exposure
- Select suitable local exhaust ventilation
- Keep the work area ventilated
- Use suitable RPE where the assessment requires it
HSE-aligned hazard libraryCreate Welder / Fabricator
Create Welder / Fabricator
RAMS in Under 10 Minutes
Start with welding, fabrication and cutting hazards, then tailor the permit, fume controls, fire precautions and emergency arrangements to the job and workplace.
HSE-aligned hazardsSite-ready PDF exportDigital sign-off
Rendering document
100%
What's included
Everything you need to prepare a practical welder / fabricator RAMS.
- Welding, cutting and fabrication hazard examples
- Hot-work, fume and cylinder-control prompts
- 5×5 risk matrix with pre- and post-control ratings
- Professional PDF export with your branding
- Digital sign-off and audit trail
Common welder / fabricator jobs
RAMS Builder includes guided examples for these typical welder / fabricator tasks.
MIG and MAG weldingTIG weldingMMA arc weldingOxy-fuel cuttingSteel fabrication and assemblyOn-site repair welding
Typical hazards and controls
Pre-loaded hazards and controls for welder / fabricator work.
Arc flash, UV radiation and burns
- Use suitable welding PPE
- Screen the work from others
- Handle hot metal with appropriate tools and gloves
Fire and explosion from hot work
- Follow the site hot-work permit process
- Remove or protect combustibles
- Provide fire-fighting equipment and fire watch arrangements
Gas cylinders and electrical equipment
- Secure and transport cylinders correctly
- Check hoses, regulators and flashback protection
- Inspect leads and isolate equipment before maintenance
Method statement steps
A typical method sequence for welder / fabricator work.
- 1Review the drawing, materials, location and site hot-work controls
- 2Set up screens, ventilation, fire precautions and exclusion area
- 3Inspect welding equipment, leads, hoses and cylinders
- 4Cut, prepare and assemble materials
- 5Complete welding or fabrication to the agreed sequence
- 6Inspect the work, complete the fire watch and leave the area safe
Example output
Review a fully featured welder / fabricator RAMS example with hazards, permits, COSHH, and sign-off details.
Welder / Fabricator example RAMS PDF
See how the finished document is structured before you customise it for the live site.
Frequently asked questions
Common questions about welder / fabricator RAMS.
What should a hot-work RAMS include?
Record the work location, permit requirements, combustible-material controls, fire-fighting provision, ventilation, site communication and the fire-watch period required by the client or site rules.
How should welding fume controls be selected?
Consider the process, consumables, base metal, coating and work location. Use the hierarchy of control, such as local exhaust ventilation and suitable work positioning, then add RPE where the assessment shows it is needed.
What cylinder controls belong in a welding RAMS?
Include secure storage and transport, valve protection, correct regulators and hoses, separation from ignition sources, leak checks and the emergency procedure for the gases in use.
Build your document
Ready to create your welder / fabricator RAMS?
Start from the example, customise it for the live job, and export a site-ready PDF when you're happy.
Create RAMS for your work
Sign up to create a RAMS document for your project with the details that apply to your work.
Sign up to get started